I am now the proud owner of a set of dual Weber DCOE intake manifolds.
This conversion was originally made by Cannon and is the same manifold that Pierce Manifolds sells for $300.
Both the left and right manifolds are identical, there is not much to them at all. The linkage kit is a simple design and uses a big shaft that goes through the extensions in the manifolds.
I also have scanned and posted the original installation instruction sheets:
Page One
Page Two
Page Three
The instructions fail to mention that this setup will not work with the stock power steering pump. I have been informed that a "ZF" style pump off of a later model 2.5 is smaller and will clear the manifolds.
More to come...
